Tales of Tamar

Hi all

Had this one today, please check.

----begin report----
ToT starting...
Type Command-Q to quit or Command-S to save these messages.
Error messages starting with minus sign are not important.
-----------------------------------------------------------
BlitFigur : die Spielfigur von Spieler 4294967286 auf Position X: 74 Y: 25 ist defekt !!! Eventuell pfuscht der Spieler ! GrafikID 1013
BlitFigur : die Spielfigur von Spieler 4294967286 auf Position X: 74 Y: 25 ist defekt !!! Eventuell pfuscht der Spieler ! GrafikID 1013
----end report----

The same again today.....

greets

Dear MacLeoid.

In the PC System the Y-position has always 4 digits. Could you please check this and give me the correct position of the damaged field?

The same with your town please (I wont post a seperate message for this...)

Regards, James.

On 2003-09-18 16:10, PCProff wrote:

In the PC System the Y-position has always 4 digits. Could you please check this and give me the correct position of the damaged field?

Hello James,

the position of the field is quite correct. It's just in the south of the zero-line. Coordinates can have up to 5 digits in X-direction and up to 4 digits in Y-direction, but go down to zero. (0/0 lays directly near Noia)

The field described belongs to the undead, which are probably not yet implemented into the Mac-Client.
So this is the reason why the client doesn't know that gfx id. So this is no bug, just not yet implemented figures. All in all nothing to worry about.

Kind regards,
Christian

Dear Godefroy, PCProfi

Yep, I had something like this in my head. This coordinates belong to a ruin on eastern Tandria so this "unknowned" can be undead.
Last quarter I attacked them and was winner without any lost on my side?! I hope they'll stay in theyr graves now.

Greets

Sorry, I forget:
The message after turn download still exists. I've also the problem that I cannot build a taverne in my new city. It is in underway the system means. But it have to be build since two qurters and still no picture of it in the city screen.

And another effect of this bug (?):
My statistics are available only to the time when I conquered the first town. After this are no statistics there. And also no gfx on the town screens (but there has to be a granary - or not?), only a lot of grass and a river...

And sorry, am I alone here with this one? Or am I alone in general? Why there is no reply on this subject?
I can live with it for some time but it has to be solved sometime.

Marc

Dear Mac Leoid.
I must excuse. You are definitely not alone, but for as Mac has not so many folks around, it is much more difficult to gain information.
So thanks to Godefroy! I'm still trying to get in contact with the Mac Programmer to check your situation.
Could you create a bug report and send it to jtdicken@freenet.de? Add your actual Map&Date maybee zipped.
Sorry for the delay.
Kind regards, James.

If the problem still persists - send me the data and map folders. This would give me a chance to check what is wrong there.

Balcer
sent it to: balcerzak.m@gjpoland.com.pl

Michal,

I'll do it this evening. Please look at this "building" message window. But I have it only after dl a new turn.....
and I haven't any buildings (also no taverne, but in the build screen when I choose to build a taverne the prog means it is in building)in my new towns (but I builded some mills and granarys). And the statistics are stopped some quarters ago just the turn before annex the first town....

You'll recieve map&data today.
Marc

_________________
Dale Ban MacLeoid
VIII. Chief MacLeoid of Laois

<font size=-1>[ This Message was edited by: MacLeoid on 2003-10-01 11:40 ]</font>

<font size=-1>[ This Message was edited by: MacLeoid on 2003-10-01 11:41 ]</font>

Hi,
OK, lets cleanup some threads:
1.Q. BlitFigur : die Spielfigur von Spieler 4294967286 auf Position X: 74 Y: 25 ist defekt !!! Eventuell pfuscht der Spieler

1.A. This is because the routines in the Mac version aren't the last ones and they will be upgraded.

2.Q.I've also the problem that I cannot build a taverne in my new city

2.A. This may be a problem with a town routine. It seems the game doesn't update it's gfx file. Do this: choose the town you want to go to and press the control key. When you accept you should have the town redrawed. Is the taverne here?
Anyway I see there is a bug in the towns requester.

Plese let me know whether it helped (and whether I answered all Q).
Michau

Michal,

to your two points: all okay, but this message
"working on turn 0 : ...rebuilding town..."

still exists after dl a new turn.
Also my statistics are freezed since this message has been appearing and - at the same turn - the first town conquered.

Marc

OK. Lets do this. Send me your data folder and the mail with a turn. I have to check both of them. Then I'll be able to check what is wrong. But remember, the turn mail is important.

Michau

Michal:
Will do it tomorrow.

Greets
Marc